Dolphin® DemosFor Windows Mobile® 6.0 (7600)Windows Mobile® 6.1 (9900)User’s Guide
1 - 6Folder on the WorkstationAfter installation on the workstation is complete, the upgrade files are stored on the workstation at C:\Program Files\H
1 - 79. When all the files are pasted, cold boot the terminal. 10. The Power Tools upgrade installs during startup.Install LocationsWhen install is co
2 - 12Imaging DemoOverviewThe Imaging Demo demonstrates the imaging functionality of the on-board image engine, such as picture formatting, saving and
2 - 2Tap File > Save As. The Save As window opens. Folder None - Selecting this option saves files to the My Documents folder.Name Select the BMP,
2 - 3To Select a Profile1. Tap Image > Profile. The Profile menu opens. 2. Select the profile; Normal is selected by default. 3. The selected pro
2 - 4MenusFile MenuMenu Item DescriptionExit Exits the Imaging Demo.Restore Defaults Restores the Imaging Demo to the default settings. Open Opens ima
2 - 5Setup MenuMenu Item DescriptionAimer Enables and disables the imager’s aimer.Illumination Enables and disables the illumination LEDs on the image
3 - 13IQ Imaging DemoOverviewThe IQ Imaging Demo decodes intelligent bar codes, inserting the data from the bar code into the appropriate fields on th
DisclaimerHoneywell International Inc. (“HII”) reserves the right to make changes in specifications and other infor-mation contained in this document
3 - 22. Scan the bar code below. Note: This bar code has been created with information that the IQ Imaging Demo can decode and insert into the fields
3 - 3To Save Scanned InformationYou can save an image of the scan or an image of the bar code. Tap File > Save Image or File > Save Bar Code. To
3 - 4
4 - 14Print DemoOverviewThe Print Demo test-prints a sample bar code or receipt to compatible Bluetooth or Infrared (IrDA) printers. The bar code and
4 - 2Printing to a Bluetooth PrinterA Dolphin terminal configured with a Bluetooth radio can communicate with other Bluetooth serial devices. Applicat
4 - 3Printing to an IrDA PrinterEvery Dolphin terminal contains an IrDA port that communicates with IrDA devices.Requirements• The IrDA printer must b
5 - 15Scan DemoOverviewThe Scan Demo decodes bar codes and provides a readout on the screen. In addition, the Scan Demo provides scanning statistics f
5 - 2Clearing Scan DataTap File > Clear to erase the current scan data.Field This field displays …Symbol The symbology type.Length The length of th
5 - 3Auto ScanWhen AutoScanning, Scan Demo scans continuously.1. Place the Dolphin terminal so that it is pointing directly at a bar code.2. Tap Scan
iiiChapter 1 - Installing and Accessing DemosOverview ...
5 - 4Decode ModesThe Scan Demo has three scan modes:1. Full Omni/Standard This is the default scan mode. The scan engine looks for any bar code withi
5 - 5SymbologiesThe Scan Demo can decode a bar code only if its bar code symbology is selected in the symbologies list. To see this list, tap Setup &g
5 - 6Default SettingsTo restore the Scan Demo to default settings at any time, tap File > Restore Defaults. Taking Images of Bar CodesThe Scan Demo
6 - 16Signature Capture DemoOverviewThe Signature Capture Demo captures a signature on the touch screen.To Capture a Signature1. Tap Start > Demos
6 - 23. Tap File > Save. To Clear a SignatureTo clear a signature from the screen, tap Clear Signature. The written text disappears from the screen
7 - 17GPS DemoOverviewThe GPS Demo enables you to test the functionality of the GPS receiver integrated into the Dolphin 7600 or 9900 terminals. The G
7 - 2Satellites TabThe Satellites tab displays the position of the satellites found by the GPS receiver.Logger TabThe Logger tab enables logging funct
7 - 3The GPS Demo will continue to compile data until you tap Stop Logger.Raw Data TabThe Raw Data tab shows the data the GPS receiver is downloading.
8 - 18Using Image ViewOverviewImage View is a software installed on the host workstation and receives data via wireless connection from the following
ivTo Use the Scan Demo ...5-1Scan Statistics ...
8 - 2To Connect Demos on the Terminal to the Image ViewThe following Demos contain a Port Config feature that enables you to connect with Image View o
8 - 3Send and AutoSendThe Imaging, IQ Imaging, Scan, and Signature Capture Demos contain Send and/or AutoSend features. Send and AutoSend send data fr
8 - 4To Transmit Demo Data to Image ViewAfter setup on the workstation and the terminal is complete:1. On the host workstation, open Image View (Start
9 - 19Customer SupportTechnical AssistanceIf you need assistance installing or troubleshooting your device, please call your distributor or the neares
™ Honeywell700 Visions DriveP.O. Box 208Skaneateles Falls, NY 13153-0208DEMOS-WM6-UG Rev B7/09
1 - 11Installing and Accessing DemosOverviewDemos demonstrate some of the most common features and functions of Dolphin terminals, such as bar code sc
1 - 2Exiting DemosTo close the Demos main window,• Tap the Exit icon •Tap File > Exit (ESC)• Press ESC on the keyboardView OptionsThe View menu in
1 - 3Upgrading DemosDemos are loaded on every Dolphin terminal and are included in system upgrades.Acquiring UpgradesUpgrades are available from Custo
1 - 43. Click Next. If you accept the terms of the license agreement, select I accept the terms… 4. Click Next. 5. Accept or change the installation l
1 - 56. Click Install and the programs begin installing.7. The following screen appears when the programs have finished installing: 8. Click Finish.
Comentários a estes Manuais